Ocelot to Xantech - Applied Digital, Inc

You are not logged in. [Log In] Home » Forums » ADI Products » Ocelot HA Controller » Ocelot to Xantech

Page 4 of 4

Topic Options

#21585 - 01/14/10 06:15 PM Re: Ocelot to Xantech [Re: Guy Lavoie]
iceberg5xx iceberg5xx newbie Registered: 01/13/10 Posts: 2	Guy, thanks a bunch!
Top

#22243 - 12/28/10 07:43 AM

Re: Ocelot to Xantech [Re: iceberg5xx]

Guy Lavoie Offline

Beyond All Hope

Registered: 12/21/02
Posts: 6406
Loc: Montreal, QC, Canada

Code:

 

             +------------+----------------o to Xantech +12v
             |            |
             >            | E
             < 1k        |/
             >     1k   B| 
Ocelot       |---mwmw----| 2N3906 (PNP)
IR out      |/C          |\ C
(tip)      B|             |---mwmw---|>|----o to Xantech input
o---mwmw----| 2N3904      |   470   1N914
    2.2k    |  (NPN)      |
            |\E           >
             |            < 1k
             |            >
             |            |
o------------+------------+----------------o to Xantech common
Ocelot
IR out (ring)

_________________________
"If you don't know what you're doing, do it neatly..."

Top

#22245 - 12/28/10 12:57 PM Re: Ocelot to Xantech [Re: Guy Lavoie]
canGuy11 canGuy11 newbie Registered: 12/28/10 Posts: 1	Thanks a lot for re-posting the formatted schematic. Just made a 2 of these and they work great. $20 in parts and even wrapped it up in a nice project box. Would have had to buy 2 GC-CGX cables, so this saved me $80.
Top

#22292 - 01/09/11 06:11 AM Re: Ocelot to Xantech [Re: Dennis Rossi]
mazda mazda newbie Registered: 01/09/11 Posts: 2	Thanks for the info......
Top