ADICON Support Forum Applied Digital, Inc.
Page 1 of 1 1
Topic Options
#23263 - 09/27/12 05:07 PM SECU16 not showing up in Leopard 2 and C-Max
Luuk Offline
junior


Registered: 08/20/03
Posts: 40
Loc: Netherlands
I have a problem at the moment with SECU16
Tried all I could find on the forum, so need help here.

This combination Leopard + SECU16 all worked for years, but now since I wanted to update my programm a few lines (10 minutes work) this part of the project (getting secu16 back online) took me already hours.

Remarkable: Needed to download C-Max to load the new programm and maybe have a new version of C-Max and Leopard Executable (due to automatic update?).

Setup: Leopard + Secu16 wired with aprox 50 cm wire

Even when I follow install procedure
1) power off / on
2) Auto adress modules via Cmax
3) unload the programm, (only program with End program'on first line
4) reloaded the Controler executive
5) I Added in the program a dump of the I/O error - it generates an I/O error on module 1 (when using full programm)
..

With auto Adres (run more than once)
- C-Max says Looking for Module 1
- SECU16 active led keeps blinking 1 second on/ 1 second off (so it looks like it does not go into Auto Adress Mode
- comms led is not flickering
- C-Max keeps on waiting on 'Looking for Module 1'

Any hints?

Loading leopard programm works, all works as before (exept communication with SECU16).
_________________________
Luuk

my company http://www.vicus.nl
Expert in CRM and E-Commerce
=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:

Top
#23264 - 09/27/12 06:07 PM Re: SECU16 not showing up in Leopard 2 and C-Max [Re: Luuk]
Guy Lavoie Administrator Offline
Beyond All Hope
*****

Registered: 12/21/02
Posts: 6548
Loc: Montreal, QC, Canada
Could be a bad comms chip. Looks like this is your only expansion module so swapping the comms chip won't be possible as a test. Try replacing your comms wires as a quick test, you never know.
_________________________
"If you don't know what you're doing, do it neatly..."

Top
#23267 - 09/30/12 12:56 PM Re: SECU16 not showing up in Leopard 2 and C-Max [Re: Guy Lavoie]
Luuk Offline
junior


Registered: 08/20/03
Posts: 40
Loc: Netherlands
Thanks Guy,
succeeded in having comms again - removed all wiring and placed them back - that helped for now
_________________________
Luuk

my company http://www.vicus.nl
Expert in CRM and E-Commerce
=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:

Top
Page 1 of 1 1


Moderator:  Dan Smith, Monte G, ADI Tech Support, Guy Lavoie 
Hop to:
Who's Online
0 registered and 62 anonymous users online.
Recent Posts
Ocelot not working
by JPO
11/08/17 06:02 AM
Shout Box

Newest Members
brigiel, vevevie, zhutree, 416, saiqul
3003 Registered Users
Forum Stats
3003 Members
19 Forums
4004 Topics
23442 Posts

Max Online: 132 @ 11/13/16 10:07 AM
November
Su M Tu W Th F Sa
1 2 3 4
5 6 7 8 9 10 11
12 13 14 15 16 17 18
19 20 21 22 23 24 25
26 27 28 29 30