ADICON Support Forum Applied Digital, Inc.
Page 1 of 1 1
Topic Options
#22927 - 02/28/12 03:49 PM cant get AT100 adress
dlloyd560 Offline
junior


Registered: 11/18/10
Posts: 38
I bought this http://www.automationtec.net
I cant get to adress to my Leopard 2 anyone have any ideas?
It works fine when I hook it to my computer.

Top
#22928 - 02/28/12 05:41 PM Re: cant get AT100 adress [Re: dlloyd560]
Guy Lavoie Administrator Offline
Beyond All Hope
*****

Registered: 12/21/02
Posts: 6548
Loc: Montreal, QC, Canada
What do you mean by "I cant get to adress to my Leopard 2"?
_________________________
"If you don't know what you're doing, do it neatly..."

Top
#22929 - 02/28/12 06:27 PM Re: cant get AT100 adress [Re: Guy Lavoie]
dlloyd560 Offline
junior


Registered: 11/18/10
Posts: 38
Sorry Guy I ment that I couldn't get the AT100 to Auto address to the Leopard. I finally got it to auto address but now I have no data on both the AT200t and the AT200c any ideas? Thanks
Top
#22934 - 02/29/12 07:43 AM Re: cant get AT100 adress [Re: dlloyd560]
dlloyd560 Offline
junior


Registered: 11/18/10
Posts: 38
This is the problem i'm having I have a leopard 2 and one bobcat temp. I just purchased AT-100 with A AT-200t and a AT-200c I'm trying to hook the up to my leopard through the RS-485 adnet bus. So I auto addressed the AT-100 that worked fine. When i open cmax i can see the AT-200c and the AT-200t I/Os (they are all off) and the data colunms have 0 in them and it never changes. Now I can pull up the modules parameters but I can't change any of them. It to me sounds like the AT-100 is not sending data on the adnet bus. The temp bobcat that is hooked to the leopard is working fine. Do you think that the AT-100 is defective or am I missing something? Thanks Dave
Top
#22935 - 02/29/12 09:44 AM Re: cant get AT100 adress [Re: dlloyd560]
ADI Tech Support Moderator Offline
old hand


Registered: 12/22/02
Posts: 718
Loc: Branson West, MO
Dave,

Please check you e-mails. I sent you application version 3.19, which when loaded into the Leopard will report the data you need reported.

Kevin Barrett
ADI Tech Support

Top
#23279 - 10/18/12 01:35 PM Re: cant get AT100 adress [Re: ADI Tech Support]
Luuk Offline
junior


Registered: 08/20/03
Posts: 40
Loc: Netherlands
@Kevin,

I bought the same stuff (AT100/AT200) and running 3.18. I Understand I need 3.19 ? Where can I get that?
_________________________
Luuk

my company http://www.vicus.nl
Expert in CRM and E-Commerce
=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:

Top
#23280 - 10/18/12 02:12 PM Re: cant get AT100 adress [Re: Luuk]
ADI Tech Support Moderator Offline
old hand


Registered: 12/22/02
Posts: 718
Loc: Branson West, MO
Luuk,

Send your e-mail address (kevinbarrett@appdig.com) ad I'll get it to you.

Kevin Barrett
ADI Tech Support

Top
#23282 - 10/18/12 02:21 PM Re: cant get AT100 adress [Re: ADI Tech Support]
Luuk Offline
junior


Registered: 08/20/03
Posts: 40
Loc: Netherlands
Kevin,
I just send it
_________________________
Luuk

my company http://www.vicus.nl
Expert in CRM and E-Commerce
=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:

Top
#23283 - 10/18/12 02:24 PM Re: cant get AT100 adress [Re: Luuk]
ADI Tech Support Moderator Offline
old hand


Registered: 12/22/02
Posts: 718
Loc: Branson West, MO
Sent.

Kevin Barrett
ADI Tech Support

Top
#23284 - 10/18/12 04:02 PM Re: cant get AT100 adress [Re: ADI Tech Support]
Luuk Offline
junior


Registered: 08/20/03
Posts: 40
Loc: Netherlands
Kevin,
I got the software and uploaded - seems to work - thanks for fast respons!

1)
Is it normal thet the AT200 sensors appear in C-MAX as TYPE 27 ?

TYPE as in module overview where "SECU-16" is shown

SECU-16 |
27 |
27 |

(SECU-16 with 2 AT200-Humidity sensors)

2)
Is there more info available about the values in the I/O (ON/OFF) and parameter lists?
_________________________
Luuk

my company http://www.vicus.nl
Expert in CRM and E-Commerce
=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:

Top
#23594 - 08/23/13 01:40 AM Re: cant get AT100 adress [Re: Luuk]
haijun1122
Unregistered



RS Gold is a plastic surgery process used for correcting, reconstructing and restoring functions which enhances the nose by vanishing nasal trauma (bomb, stark, sharp). You can say it is a facial aesthetic activity, usually performed to raise the structure of nose .
During the continent cartilages and bones are qualified or tissue is intercalary, to change the visible request of the smell for census purposes and to meliorate the bone fractures. When the lift is victimised to meliorate nasal fractures, the goal of this is to reconstruct the pre-injury attendance of the pole.

The compounding of operative either first hand or collateral, cooperative with injecting Restylane into the spout has gotten good results and fabulous satisfaction to the patient. Juvéderm and Restylane are hyaluronic acids which can work upto twelve months and sometimes mortal when injected into different facial irregularities, defects, or low facial lines, which locomote as vocalization lines, lift lines or brush lines. Juvéderm have also been noted to be WOW Gold to inject around the interpretive area, upended lip lines or into the lips.
This techniques helps to modify the aesthetic outcome of ornamental wind surgery without doing far trespassing operative procedures in spout. Especially those patients who possess had individual Rhinoplasty operations, can often be improved in a Cheap Runescape Gold environs without operative intervention by using roughly 1 cc of Juvéderm (or Restylane) or lower with a diminutive standard stylus with lowest patient status.

Top
Page 1 of 1 1


Moderator:  Dan Smith, Monte G, ADI Tech Support, Guy Lavoie 
Hop to:
Who's Online
0 registered and 56 anonymous users online.
Recent Posts
am pm
by edr
05/05/17 05:25 PM
Shout Box

Newest Members
brigiel, vevevie, zhutree, 416, saiqul
3003 Registered Users
Forum Stats
3003 Members
19 Forums
3999 Topics
23425 Posts

Max Online: 132 @ 11/13/16 10:07 AM
May
Su M Tu W Th F Sa
1 2 3 4 5 6
7 8 9 10 11 12 13
14 15 16 17 18 19 20
21 22 23 24 25 26 27
28 29 30 31