#22025 - 08/06/10 04:42 PM
ocelot and x10,time
|
lurlette
newbie
Registered: 09/12/09
Posts: 15
|
my ocelot gives wrong time and does not send or recieve x10 commands,if i click get time,it shows thursday 23 2009,i did a reload of exec. and same results,amy help would be welcomed.Thanks(cpuxa 2.00E5-VER 3.18)
|
|
Top
|
|
|
|
|
#22026 - 08/07/10 06:15 AM
Re: ocelot and x10,time
[Re: lurlette]
|
ADI Tech Support
addict
Registered: 12/22/02
Posts: 608
Loc: Branson West, MO
|
To set the clock, make sure your PC clock is correct. Using C-Max, click Controller Utilities, Set Controller Clock to PC Clock.
For your X10, Is the X10 light illuminated on the Ocelot? If not, make sure you are using a straight through modular cable (the one that came with the Ocelot) between the Ocelot and your power line interface. A modular cable purchased from a local store will not work.
If the X10 light is illuminated, make sure there is nothing plugged into your power that filters out noise, such as UPS or surge suppressors. These devices will kill X10 signals.
Kevin Barrett
ADI Tech Suport
|
|
Top
|
|
|
|
|
#22027 - 08/08/10 09:37 AM
Re: ocelot and x10,time
[Re: ADI Tech Support]
|
lurlette
newbie
Registered: 09/12/09
Posts: 15
|
Hi Tech GuY I did try all of the above,reload about twenty times.unplug and plug in about the same amount of time,move the TW523 TO DIFFERENT POINT around the house,try to reload my ir codes that worked before and now ocelot does1nt even learn the codes,gives message that it timed out,ocelot does`nt even send or recieve x10 signal,it worked perfect before then all of a sudden it just stop working.Active led blinks about three times per second.x-10/ir is lit solid green,comms is off,was trying all that con be tried to this point,what else can be done.please advise me,like i said i have been at this for about three weeks now.Thanks
|
|
Top
|
|
|
|
|
#22029 - 08/08/10 03:04 PM
Re: ocelot and x10,time
[Re: Guy Lavoie]
|
lurlette
newbie
Registered: 09/12/09
Posts: 15
|
Hi Guy, i did do all of that and now the comms led is red solid,don`t know what else to do,i tried to reset(unplug) and same problem,any other advise.Thanks
|
|
Top
|
|
|
|
|
#22031 - 08/08/10 04:15 PM
Re: ocelot and x10,time
[Re: Guy Lavoie]
|
ADI Tech Support
addict
Registered: 12/22/02
Posts: 608
Loc: Branson West, MO
|
You mentioned it timed out. In the Controller Access screen to the right of the RX and TX will read Firmware and Application version. What are the firmware and Application versions reported?
Kevin Barrett
ADI Tech Support
|
|
Top
|
|
|
|
Moderator: Dan Smith, Monte G, ADI Tech Support, Guy Lavoie
|
0 registered
and 26 anonymous users online.
|
|
2747 Members
19 Forums
3835 Topics
22711 Posts
Max Online: 67 @ 08/16/11 03:08 PM
|
|
|
|
|
|
1
|
2
|
3
|
4
|
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
|
26
|
27
|
28
|
29
|
|
|
|
|
|
