ADICON Support Forum Applied Digital, Inc.
Page 1 of 1 1
Topic Options
#21877 - 06/14/10 08:19 AM Adding Ocelot support to Elve
John Hughes Offline
newbie


Registered: 06/14/10
Posts: 8
Hello,

We have been receiving many requests to create a device driver for Elve to support the Ocelot device. Elve is currently in beta and will be commercially available in the Summer of 2010. We are doing some preliminary research on supporting the Ocelot and have a few questions:

1. Is there a more recent protocol document then the one labeled 3, March 2000?

2. Are promotional or demo devices available for testing our device driver?

3. Is there a technical contact if we have any questions?

For information on Elve please visit our website at: http://codecoretechnologies.com

Thanks,

John Hughes
Codecore Technologies, LLC

Top
#21879 - 06/14/10 06:46 PM Re: Adding Ocelot support to Elve [Re: John Hughes]
Guy Lavoie Administrator Offline
Beyond All Hope
*****

Registered: 12/21/02
Posts: 6548
Loc: Montreal, QC, Canada
You will find some additional information about the serial protocol here:

http://www.appdigusers.com/forums/ubbthreads.php/ubb/showflat/Number/15465#Post15465

For technical contact information, send an email to adiinfo@appdig.com
_________________________
"If you don't know what you're doing, do it neatly..."

Top
#23608 - 09/15/13 08:47 AM Re: Adding Ocelot support to Elve [Re: Guy Lavoie]
JerrySchull Offline
newbie


Registered: 11/24/08
Posts: 2
Loc: Atlanta, Ga
Guy,
I'd like to use a pc for the controller instead of the Ocelot. Is it possible to get the specs on the ADnet Protocol?

I'm an SysAdmin/Programmer for an ATT lab here in Atlanta. I'd like to set up a single PC with multiple RS485 cards that can monitor multiple ADNet networks throughout our building. This would be a custom in-house design, not to be used externally.

I currently have two networks in production, each equipped with a PC/Ocelot for monitoring. The objective is to use one PC and multiple RS485 cards to monitor the entire building.

If an non-disclosure agreement is required, I'm fine with that. I do that all the time.

Top
#23610 - 09/18/13 05:49 AM Re: Adding Ocelot support to Elve [Re: JerrySchull]
ADI Tech Support Moderator Offline
old hand


Registered: 12/22/02
Posts: 718
Loc: Branson West, MO
Jerry,

Thank you for your inquiry. Our RS485 ADNET protocol is proprietary and is not released. You can connect multiple Ocelots to a single ADNET setup and monitor the bus in that way. The Master Ocelot and read the status of the modules and variables can be set on the slave Ocelots to indicate the status of the various modules. The RS232 protocol is published on our web site.

Kevin Barrett
ADI Tech Support

Top
Page 1 of 1 1


Moderator:  Dan Smith, Monte G, ADI Tech Support, Guy Lavoie 
Hop to:
Who's Online
0 registered and 49 anonymous users online.
Recent Posts
Shout Box

Newest Members
brigiel, vevevie, zhutree, 416, saiqul
3003 Registered Users
Forum Stats
3003 Members
19 Forums
4000 Topics
23426 Posts

Max Online: 132 @ 11/13/16 10:07 AM
August
Su M Tu W Th F Sa
1 2 3 4 5
6 7 8 9 10 11 12
13 14 15 16 17 18 19
20 21 22 23 24 25 26
27 28 29 30 31