ADICON Support Forum Applied Digital, Inc.
You are not logged in. [Log In] Home » Forums » ADI Products » ADICON Modules » Power Failure broke my SpeakEasy
Register User       Forum List       Calendar       FAQ
Page 1 of 1 1
Topic Options
#21658 - 03/01/10 07:16 AM Power Failure broke my SpeakEasy
Gazou Offline
newbie


Registered: 07/04/04
Posts: 20
Loc: Laval
Bonjour to all

Last week, a few minutes power failure result in a speak Easy lost of voice. My setup is connected to UPS, but my guess, computer drain out the battery. When power came back, Ocelot did start as normal, but the audio functions did not starts back. When the speakeasy tries to "speak" we only can ear the forst 1/100 of second of the sond and then, stop.

I am trying to record back over this morning, but the Green LED comes green for 1/100' of a second without recording new sound....

Is my sprak Easy :

1 - Broken
2 - not address correctly (will try later )
3 - ever happend to some one else.

thanks

Gazou
Top
#21659 - 03/01/10 07:51 AM Re: Power Failure broke my SpeakEasy [Re: Gazou]
ADI Tech Support Moderator Offline
addict


Registered: 12/22/02
Posts: 608
Loc: Branson West, MO
In C-Max, does C-Max report seeing the SpeakEZ in the Controller Access screen?

Kevin Barrett
ADI Tech Support
Top
#21660 - 03/01/10 07:56 AM Re: Power Failure broke my SpeakEasy [Re: ADI Tech Support]
Gazou Offline
newbie


Registered: 07/04/04
Posts: 20
Loc: Laval
yes, I can see it, and I can send a "play" fonction from it, it starts the first 1/100 second of the sound (that I can ear, it is the good sound) but time is not long enough.

Tx
Top
#21661 - 03/01/10 07:58 AM Re: Power Failure broke my SpeakEasy [Re: Gazou]
Gazou Offline
newbie


Registered: 07/04/04
Posts: 20
Loc: Laval
And All IO's are Off exept # 0, that is On, for a data = 1 (if it can help).

I did rescan for address, reload controlor executive and script... no joy
Top
#21662 - 03/01/10 08:15 AM Re: Power Failure broke my SpeakEasy [Re: Gazou]
Guy Lavoie Administrator Offline
Beyond All Hope
*****

Registered: 12/21/02
Posts: 6401
Loc: Montreal, QC, Canada
Could some module parameter be off? Try retrieving the module parameters and post them here.
_________________________
"If you don't know what you're doing, do it neatly..."

Top
#21663 - 03/01/10 08:18 AM Re: Power Failure broke my SpeakEasy [Re: Guy Lavoie]
Gazou Offline
newbie


Registered: 07/04/04
Posts: 20
Loc: Laval
So it is Module 4
Par = Value
0 = 0
1 = 4
2 = 85
3 = 170
4 = 0
5 = 0
6 = 0
7 = 240
8 = 85
9 = 1
10 = 0
11 = 0
12 = 0
13 = 24
14 = 0

I hope this help you
Top
#21664 - 03/01/10 08:19 AM Re: Power Failure broke my SpeakEasy [Re: Gazou]
ADI Tech Support Moderator Offline
addict


Registered: 12/22/02
Posts: 608
Loc: Branson West, MO
In C-Max, click Module Utilities, Retrieve Module Parameters. Check parameter 5. It should be either 0 for a message length of 4.8 seconds, 1 for a message length of 10 seconds or 2 for a message length of 20 seconds. What is parameter 5 set to?

Kevin Barrett
ADI Tech Support
Top
#21665 - 03/01/10 08:20 AM Re: Power Failure broke my SpeakEasy [Re: Gazou]
Gazou Offline
newbie


Registered: 07/04/04
Posts: 20
Loc: Laval
Is of the IO, it change in the last few minutes
All set to OFF exept IO#3 that is on now
Top
#21666 - 03/01/10 08:21 AM Re: Power Failure broke my SpeakEasy [Re: Gazou]
Gazou Offline
newbie


Registered: 07/04/04
Posts: 20
Loc: Laval
Sorry, we are writing at the same time... value number 5 is 0
Top
#21667 - 03/01/10 08:34 AM Re: Power Failure broke my SpeakEasy [Re: Gazou]
Guy Lavoie Administrator Offline
Beyond All Hope
*****

Registered: 12/21/02
Posts: 6401
Loc: Montreal, QC, Canada
Kevin, should he try setting all other parameters (other then 1 and 5) to 0?
_________________________
"If you don't know what you're doing, do it neatly..."

Top
#21668 - 03/01/10 09:12 AM Re: Power Failure broke my SpeakEasy [Re: Guy Lavoie]
ADI Tech Support Moderator Offline
addict


Registered: 12/22/02
Posts: 608
Loc: Branson West, MO
I am more inclined to reset the SpeakEZ to factory default settings.

Connect the SpeakEZ directly to the Ocelot with no other modules connected. Set the address to 255 (parameter 1).

Cycle power to the SpeakEZ then the Ocelot. The SpeakEZ should be at address 1 at that point. You can then re-set the address and see if the problem is resolved.

Kevin Barrett
ADI Tech Support
Top
#21670 - 03/01/10 09:38 AM Re: Power Failure broke my SpeakEasy [Re: ADI Tech Support]
Gazou Offline
newbie


Registered: 07/04/04
Posts: 20
Loc: Laval
WWWWWWWWWWWWWWWWWWWWWWoooooooooooooooooooooWWWWWWWWWWWWWWWWWWW

That was a major fix, but followed the simple step by step and ........ it is working. If I would have loved to find that before on the forum, I would have tried it.

Even the audo bank is still there (exept the 2 that I tried re-record)...........

Wow, thanks a lot, that is great and my wife is back happy (WAF back to 0).... (for how long????)

Thanks Again Kevin et merci beaucoup (encore) Guy

(search words : reset speak easy, reboot, audio problem)
Top
Page 1 of 1 1


Moderator:  Dan Smith, Monte G, ADI Tech Support, Guy Lavoie 
Hop to:
Who's Online
3 registered (pbir, Bent, Martin in Texas) and 31 anonymous users online.
details
Recent Posts
SECU16IR Output Connecting To A Xantech Connecting Block
by Jean-Marie
Today at 08:36 AM
SECU16IR Output Connecting To A Xantech Connecting Block
by Jean-Marie
Today at 08:34 AM
how to post an icon
by manu
02/03/12 03:40 AM
Command Pair
by kuro
02/01/12 12:49 AM
Does anyone have a copy of the latest TSE?
by sevenzenith1
01/30/12 05:17 AM
Shout Box

Newest Members
feshh, manu, kuro, chuck214, Funkhauser
2747 Registered Users
Forum Stats
2747 Members
19 Forums
3837 Topics
22713 Posts

Max Online: 67 @ 08/16/11 03:08 PM
February
Su M Tu W Th F Sa
1 2 3 4
5 6 7 8 9 10 11
12 13 14 15 16 17 18
19 20 21 22 23 24 25
26 27 28 29
My Cookies · Mark all read Powered by UBB.threads™ Contact Us · Home · Top