ADICON Support Forum Applied Digital, Inc.
Page 1 of 1 1
Topic Options
#21638 - 02/23/10 10:24 AM To send an IR command
Ariel Offline
newbie


Registered: 09/12/07
Posts: 23
Loc: Argentina
Hi,

I'm trying to write a code to control the transmission of IR learned commands from an Ocelot to A/V devices. In the CPUXA protocol I see the SEND RESIDENT IR data packet, I think it is the function I have to use. Valid numbers for IRnumber data are 0 through 39. That's the point. I don't understand why there is not 1024 available IR codes.

It is very important because I have a lot of devices to control by wired IR commands.

Thanks!

Ariel.

Top
#21639 - 02/23/10 10:34 AM Re: To send an IR command [Re: Ariel]
Guy Lavoie Administrator Offline
Beyond All Hope
*****

Registered: 12/21/02
Posts: 6548
Loc: Montreal, QC, Canada
I just looks like the document is not exctly right in the description. The command syntax itself show that you have 2 bytes, msb and lsb, and this is the command used by C-Max itself in the IR utilities, which allows you to send all 1024 IR codes.
_________________________
"If you don't know what you're doing, do it neatly..."

Top
#22097 - 09/05/10 03:33 PM Re: To send an IR command [Re: Guy Lavoie]
John Hughes Offline
newbie


Registered: 06/14/10
Posts: 8
I have a couple related questions:

1. So the docs show the "Send Resident IR" command's IRNumber parameter's value range is 0-39, and you are saying that the docs are wrong and the value range should be 1-1023? (You actually said 1024 codes, but I assume you really mean 1-1023 since it is my understanding that #0 is reserved)?

2. Since there is the "Send Resident IR" command and the "Send Remote IR" command, I assume that the "Send Resident IR" command sends the IR directly from the Ocelot and it does not support zones?

Top
#22099 - 09/05/10 04:48 PM Re: To send an IR command [Re: John Hughes]
ADI Tech Support Moderator Offline
old hand


Registered: 12/22/02
Posts: 723
Loc: Branson West, MO
1) This needs to be updated. When the Ocelot (originally called the CPUXA) was released, it was limited to 0-39 (we had less memory at that time). It is 1-1023 now.

2) Yes, Resident IR means transmit the IR command locally.

Kevin Barrett
ADI Tech Support

Top
#22101 - 09/05/10 08:28 PM Re: To send an IR command [Re: ADI Tech Support]
John Hughes Offline
newbie


Registered: 06/14/10
Posts: 8
Thank you for the clarification.
Top
Page 1 of 1 1


Moderator:  Dan Smith, Monte G, ADI Tech Support, Guy Lavoie 
Hop to:
Who's Online
0 registered and 49 anonymous users online.
Recent Posts
Ocelot not working
by JPO
11/08/17 06:02 AM
Shout Box

Newest Members
brigiel, vevevie, zhutree, 416, saiqul
3003 Registered Users
Forum Stats
3003 Members
19 Forums
4004 Topics
23442 Posts

Max Online: 132 @ 11/13/16 10:07 AM
November
Su M Tu W Th F Sa
1 2 3 4
5 6 7 8 9 10 11
12 13 14 15 16 17 18
19 20 21 22 23 24 25
26 27 28 29 30