|
Hey all:
I'm looking for a low cost current switch to monitor some pumps. I've tentatively planned to use a CR Magnetics CR9380-NPN and wanted to know if anyone has used this or other Current switchs (or even transducers). The cut sheet is at
media.digikey.com/pdf/Data%20Sheets/CR%20Magnetics%20Inc%20PDFs/CR9380.pdf
Other forums report good success interfacing this to X10 DS10A dry contracts and so I'm assuming this will work well, but thought I'd ask.
Thanks
Ken
Edited by ken d (06/15/09 01:22 PM)
| 
