I bought a leo pad over a year ago and I have not been able to get it to work. I had an old pad that was damaged so I bought the new one. I place the program from the first pad into the new one. I will seem to work but then the pad will start turning lights on and off on is own and then start to beeb. There does not seem to be a pattern to this problem. Is there a way to test the hardware of the pad? Any ideas on the problem?
#20991 - 04/01/0912:06 PMRe: Leopard II Touchpad Problem
[Re: JimCoeur]
Guy LavoieGuy Lavoie
Beyond All Hope
Registered: 12/21/02
Posts: 6401
Loc: Montreal, QC, Canada
Hmm, not obvious. It could be the ribbon cable between the screen and the main board that needs to be reseated. It could also be the small cpu board that plugs into the main board that is not fully connected. With everything powered off, try unplugging that small board partially and then fully seating it again.
_________________________
"If you don't know what you're doing, do it neatly..."
