|
I'm using my Leo's to control my RCS thermostat and have had some problems. I traced it down to my Leo's. I have a thermostat screen on my Leo's with a set temp display and a button to increment the set temp up and another button to increment the set temp down. The set temp display is tied to V29. Problem is that sometimes after manipulating the set temp using the buttons mentioned above, the set temp will display, say, 72 but V29 in CMax says maybe 71 or something. It doesn't happen all the time, just every so often. Is this a hardware limitation or is there is there a way for me to code around this?
Thanks, Chris
|