|
Last update... I got it to work. Two mods were required.
1) Use low power IR blaster. OR put a 20K resistor in-line with stripped side of high power IR blaster. NOTE: a Low power Xantech 283M or 286M worked unmodified.
2) My primary test was the OK button. It appears that the Oclelot recorded 5 different patterns when I learned the remote for OK. Only 1 of the 5 worked. Secondly, that pattern had to be sent at least 2x for the STB to acknowledge it. I used IR_Max to edit the file. A real pain, but it FINALLY worked.
| 
