ADICON Support Forum Applied Digital, Inc.

Moderator:  Dan Smith, Monte G, ADI Tech Support, Guy Lavoie 
Page 1 of 1 1
Topic Options
#19204 - 12/31/07 12:34 PM Basic Ocelot/IR-100 Question
Roger Hunt Offline
newbie


Registered: 12/31/07
Posts: 1
Loc: Maryland
I recently purchased an Ocelot, an IR-100, and 4 IR-E1 flashers. I have never used any of these before, but I am looking forward to playing with them. There are no instructions about how to connect the IR-100 to the Ocelot. I assume that you connect the IR Emitter port on the Ocelot to the GND and SIG terminals on the IR-100 so that the tip on the Ocelot side connects to SIG and the outer ring on the Ocelot side connects to GND. Can someone verify this? Thanks.
_________________________
Roger Hunt

Top
#19207 - 01/01/08 12:09 PM Re: Basic Ocelot/IR-100 Question [Re: Roger Hunt]
Guy Lavoie Administrator Offline
Beyond All Hope
*****

Registered: 12/21/02
Posts: 6548
Loc: Montreal, QC, Canada
The Buffalo IR-100 expects a positive going signal between 9 and 12 volts. The Ocelot only puts out a 5 volt signal. It might work (but give a weak signal) but it would be best to amplify the level of the Ocelot to match the IR-100. Look at this thread, showing a circuit that is used to do the same thing for a Xantech connecting block:

http://www.appdigusers.com/forums/ubbthreads.php/ubb/showflat/Number/19157/fpart/1
_________________________
"If you don't know what you're doing, do it neatly..."

Top
Page 1 of 1 1
Previous Topic Previous Topic   View All Topics Index   Next Topic Next Topic  

Preview
Hop to:
Who's Online 0 registered and 62 anonymous users online.
details
Recent Posts Shout Box

Newest Members brigiel, vevevie, zhutree, 416, saiqul
3003 Registered Users Forum Stats 3003 Members
19 Forums
4006 Topics
23465 Posts

Max Online: 139 @ 07/14/19 01:03 AM
August Su M Tu W Th F Sa 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
My Cookies · Mark all read Powered by UBB.threads™ Contact Us · Home · Top