|
"good" (version 3) and "bad" (non addressable) t-bobcats have the same program code, only some of "bad" bobcats have other fuses, for example, not Xtall, but internal resistor. It is very strange- you can't by no means exept with special programmer change the fuses on pic.... Or it is a bad banch of pic chips?
It makes the problem.
All the parts of circurt look the same on good and bad bobcats.
Will try to read/write 24L.
Can it help ?
Can "bad" 24L data prevent autoaddressing?
Edited by oonkel (11/11/09 05:20 AM)
| 
